Top 10 14mm Y Connector UK – Pipes, Pipe Fittings & Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Meister

#ad

Meister Quick Coupling Threaded Piece – 24.66 mm 3/4 Inch Female Thread – Brass – Suitable for Drinking Water – Tested Quality – Hose Coupling/Hose Connector / 9925320

#ad
Meister #ad - Suitable for products with 3/4 inch male thread, e. G. For tap connections. Suitable for drinking water PN10 and according to DVGW VP-550 Reinforced claws provide safety combined with easy application. Internal thread: 24. 66 mm 3/4 inch, burst pressure: 30 bar, claw spacing: 40 mm, material: brass. For easy coupling or extending flexible hose lines or for connecting flexible hose lines to rigid pipes.
BrandMeister #ad
ManufacturerMeister #ad
Height1.1
Length1.69
Weight0.1
Width2.36
Part Number9925320
Model9925320

2. sourcing map

#ad

Sourcing map Straight Push Connectors,4mm OD,Plastic Straight Union,Push to Connect Tube Fitting,Push Fit Lock,Blue,8pcs

#ad
sourcing map #ad - The push-to-connect end can be rotated 360 degrees even after installation, which is convenient to use and has good sealing performance. Pack of 8pcs 4mm OD plastic straight tube fitting. Please insert the tube into the bottom before use. Push to connect fittings designed for using to connect with polyethylene, nylon and PU tubing. Mainly used for air compression systems, vacuum systems, pneumatic systems. Note: make sure that the cutting surface of the pipe is vertical.
Brandsourcing map #ad
Manufacturersourcing map #ad
Height0.79
Length3.15
Width2.36
Part Numbera18092200ux0214

3. LTWFITTING

#ad

LTWFITTING Brass Barb Splicer Mender 1/2-Inch 13mm ID Hose Fitting Air Water Fuel Hose Joiner Pack of 5

#ad
LTWFITTING #ad - Materies: BRASS. Choosing products dimensions and quantities at column of size and colour seperately, price would be more favorable if choosing wholesale. Hose id: 1/2". Type: barb hose Splicer / Mender. Net weight : 22 g/pc.
BrandLTWFITTING #ad
ManufacturerHuaxinYicheng Trade Co., Ltd. #ad
Weight0.02
Part NumberHF39130805

4. AB Tools

#ad

Air Fitting 1/4" Male Thread to 1/4" Male Thread FT01

#ad
AB Tools #ad - Individual Fitting. 27mm total length. 1/4" bsp on both ends. Zinc plated for corrosion protection. 14mm hex for tightening.
BrandAB Tools #ad
ManufacturerAB Tools #ad
Height0 cm (0 Inches)
Length0 cm (0 Inches)
Weight0.01
Width0 cm (0 Inches)
Part NumberFT01

5. Uxcell

#ad

Uxcell Brass Fitting Connector Metric M14x1.5 Male To Barb Hose ID 10mm 2pcs

#ad
Uxcell #ad - Size: 10mm barb x m14*1. 5 male; total length: 33mm / 079"; thread lengthapprox: 9mm / 1. 3"; hex width: 14mm / 055"; barb lengthapprox: 20mm / 035". One side is used to connect hoses while the other side is used to connect to metric female pipes. The barbed stems create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule not included. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way.
BrandUxcell #ad
Manufactureruxcell #ad
Part Numbera19091800ux0456
Modela19091800ux0456

6. sourcing map

#ad

Sourcing map Plastic Straight Union Push to Connect Tube Fittings 12mm OD Push Fit Lock Blue 5pcs

#ad
sourcing map #ad - Push to connect fitting can realize the pipeline together or disconnected without tools, vacuum systems, mainly used for air compression systems, pneumatic systems.

The push-to-connect end can be rotated 360 degrees even after installation, which is convenient to use and has good sealing performance. Please insert the tube into the bottom before use. Quick and simple installation. Pack of 5pcs 12mm od plastic straight tube fitting; Operating Pressure : 0-1MPa; Operating temperature:-10 - 60 Degree Celsius. Note: make sure that the cutting surface of the pipe is vertical. Push to connect fittings designed for using to connect with polyethylene, nylon and PU tubing.
Brandsourcing map #ad
Manufacturersourcing map #ad
Height1.97
Length5.12
Weight0.12
Width3.54
Part Numbera18092200ux0691

7. sourcing map

#ad

Fit Hose ID 12mm to 10mm 3pcs, sourcing map Straight Brass Barb Fitting Reducer

#ad
sourcing map #ad - The coupling for connecting two hoses with the different diameter in a straight run. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Barb dia. Fit hose id: 12mm to 10mm1/2" to 3/8"; total length: 45mm /1. 77"; hex width: 14mm / 055"; barb lengthapprox: 20mm / 079". The barbed stems create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule not included. Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way.
Brandsourcing map #ad
Manufacturersourcing map #ad
Part Numbera19091800ux0089
Modela19091800ux0089

8. sourcing map

#ad

Sourcing map Plastic Straight Union Push to Connect Tube Fitting 6mm OD Push Fit Lock Blue 5pcs

#ad
sourcing map #ad - Please insert the tube into the bottom before use. Pack of 5pcs 6mm OD plastic straight tube fitting. The push-to-connect end can be rotated 360 degrees even after installation, which is convenient to use and has good sealing performance. Mainly used for air compression systems, vacuum systems, pneumatic systems. Push to connect fittings designed for using to connect with polyethylene, nylon and PU tubing. Note: make sure that the cutting surface of the pipe is vertical.
Brandsourcing map #ad
Manufacturersourcing map #ad
Height0.79
Length3.15
Weight0.04
Width2.36
Part Numbera18092200ux0217

9. AB Tools

#ad

Euro Air Line Hose Fitting Connector Quick Release 1/4 inch BSP Male Thread 10pk

#ad
AB Tools #ad - Zinc plated for corrosion protection. 1/4" bsp male Thread. Compatible with PCL Fittings. 14mm hex for tightening. Male quick Release Fitting.
BrandAB Tools #ad
ManufacturerAB Tools #ad
Height0.79
Length6.69
Weight0.22
Width1.57
Part NumberFT094_10Pack

10. sourcing map

#ad

Sourcing map Plastic Elbow Push to Connect Tube Fitting 10mm Tube OD Pneumatic Air Push Fit Lock Fitting Blue 10pcs

#ad
sourcing map #ad - Advantage- this air fitting have abrasion resistance, Compressive and corrosion resistant, and resistance to crushing and cracking, light weight, good sealing performance and long service life.

Good design- push-to-connect tube connection on two end. A good release cap can withstand greater and stronger pressure without tripping. Operating pressure : 0-1mpa ; operating temperature:-10 - 60 Degree Celsius. Application- elbow air fitting has quick and simple installation, designed for using to connect with polyethylene, nylon and PU tubing. Universal design- product name : elbow connect fitting ; type: 90 deg Swivel Elbow Connector ; Two Tube Size OD : 10mm = 039".
Brandsourcing map #ad
Manufacturersourcing map #ad
Weight0.19
Part Numbera18092900ux0119