As an Amazon Associate I earn from qualifying purchases.1. VANDESAIL
VanDeSaiL PWM Fan Hub Fan Hub CPU cooling 4 Way Black Sleeved Braided Fan Power Cable 15 Inch for 12V Computer Fans
VANDESAIL - Please check your devices specification before installation. Function: pwm fan splitter allows you connect 4 PWM devices on a single motherboard. Design: expand 4-bit 3-pin/4-pin fan interface to solve the lack of motherboard interface, as well as focus on the fan wire.
Convenience:1 female 4-pin connector + 4 Male 4-pin Connectorsone for 12V CPU and three for case fans. Compatibility: fan hub 4 pin compatible with all 12V CPU and case fans with 4 pin or 3 pin connector. Note: don’t exceed 12v 2a total output.
2. YSSHUI
YSSHUI PWM Fan Hub PC 5 Way Splitter Sleeved PWM Fan Splitter Hub Adapter Cable for 12V Desktop Computer Cooler Case Fans 4-Pin & 3-Pin 14 inches
YSSHUI - Please check your devices specification when to use the PWM fan hub; Total product length: approx. Compatible with all 12v cPU and case fans with 4 pin or 3 pin connector;.
14 inches. Power up to 5 pc fans from a Single 4-Pin PWM Fan Header. Please note: do not exceed 12v 2a total output. Connector: 1 female 4-pin connector & 4 Male 4-pin Connectors1 for 12V CPU and 4 for case fans;.
3. GameMax
RF Remote Controller Included System Fan, 3 Pin Motherboard Header, Radiators & CPU Fan | Black, GameMax ARGB PWM Fan Hub, Powering Up To 6 Fans 3 Or 4 Pin
GameMax - Take full control of your chassis’ lighting using the 3 pin Aura Sync connector included with the hub and sync to a compatible motherboard, ASUS, ASRock or MSI. Install the hub without screws for easy installation using the sticker included and it is easily movable should you wish to get the best cable management for your system.
As well as been able to control your fans from your chassis using the built in PWM hub and 3 pin Aura connector, you can control your fan speed, LED speed or colour mode without any fuss using the RF radio frequency remote control.
The game max a rgb hub allows you to connect to six fans and allows the user to expand their cooling capabilities within your gaming PC, ultimately increasing the performance. Powered by a sata connector ensures safe installation and you can be sure to have safe and reliable power for your Six connected fans.
| Brand | GameMax |
| Manufacturer | Game Max |
| Height | 5.6 cm (2.2 Inches) |
| Length | 1.5 cm (0.59 Inches) |
| Width | 9.5 cm (3.74 Inches) |
| Part Number | GMX HUB |
| Model | GMX HUB |
| Warranty | 12 Month Warranty |
4. DEEP COOL
DeepCool Fan Hub Control 4PWM Fan Speed Supports Fan with 3Pin/4Pin Cooling FH-04
DEEP COOL - Double-sided adhesive Installation. Support PWM function. Support Cable management. 4-port fan hub. Compatible with 3-pin/4-pin fans.
| Brand | DEEP COOL |
| Manufacturer | Deepcool |
| Height | 8.64 cm (3.4 Inches) |
| Length | 6.35 cm (2.5 Inches) |
| Weight | 5.19 |
| Width | 2.54 cm (1 Inches) |
| Part Number | FH-04 |
| Model | FH-04 |
5. YMWALK
YMWALK 4 pin PWM Fan Cable Fan Splitter Adapter Cable 1 to 3 ways Converter Y Shaped Splitter Black Sleeved Extension Cable for Host Case Pack of 4
YMWALK - Product function mainly to connect if CPU plug 4-Pin is not long enough or make three computer fans share one interface. 1 to 3 ways converterthe 4-pin 1 to 3 pwm fan adapter has three male interface, one 4-pin, show the same speed and can connect to 4-pin female connector.
Temperature control the fan splitter cable provide additional fans to increase airflow in the computer case, reduce the temperature and ensure the operational speed of CPU.
Please pay attention that only 4-pin fans can use speed control. Case splitter cable the wires are 1063 inch 27cm, sleeved in black braiding, with rated temperature 176 ℉80 ℃. To avoid signal conflicts when measuring speed at the same time, two 3-pin. Package includes 4 pack 4-pin pc fan splitter cables in total. They are synchronized, two of them reduce the speed measurement line.
6. ASHATA
ASHATA Computer Fan RGB Hub,Computer 10-Channel RGB Hub,PC MOD Motherboard RGB Fan Extension Cable,RGB LED Splitter Hub,Suitable for PC Desktop Computer Motherboard5V 3-Pin
ASHATA - Rgb 10-channel hub -- expands the rgb interface of the motherboard, which can expand one interface of the motherboard into 10 to meet the use requirements of multiple devices.
Horizontal pin design-- support back line, hubs attached extension line, to meet the needs of the cabinet back line. Application-- aura svnc, such as memory/graphics card/fan/display/peripherals, simple operation, linkage support AURA devices for synchronous light effect operation, a wide range of lighting modes, to provide you with personality dazzling visual experience.
Simple & practical-- installation method is simple, beautiful and practical, is the perfect computer accessories. This 10-channel rgb hub has 12v, fast, 5V options, suitable for PC desktop computer motherboard. Tip-- any questions, please feel free contact us, we will provide you with high quality after-sales service.
| Brand | ASHATA |
| Manufacturer | ASHATA |
| Height | 1 cm (0.39 Inches) |
| Length | 1 cm (0.39 Inches) |
| Width | 1 cm (0.39 Inches) |
| Part Number | ASHATA6i9o32hkxt-02 |
7. Dilwe
3‑Pin +5V ARGB Light to 4‑Pin +12V RGB Fans, Dilwe RGB Convertor, Wizard Lighting Adapter with RGB Light ControlBlack, 5V ADD-RGB to 12V RGB Transfer Hub
Dilwe - Realize 5v add‑rgb to 12v rgb lighting conversion, 5v add‑rgb equipment can be connected to the 12V RGB motherboard through the converter to achieve synchronization and compatibility of lighting.
Convert 3‑pin +5v argb fans to 4‑pin +12v rgb capable motherboardsuport interfaces are SATA 5V×1、4‑pin（+12V‑G‑R‑B）×1 The convertor has wider applications.
Allow the motherboard with rgb socket to use argb devices. Set with multiple interfaces, and has RGB light control. Use friendly, easy to use, portable installation, no need of setting, it can not be reverse to use.
Compatible with a variety of rgb interfaces, compatible with 3PIN interface RGB products of major manufacturers for ASUS/Gigabyte/MSl on the market, with good compatibility. The product owns convenient installation, magnetic or loop fastener installation back magnetic layout, beautiful cable management.
| Brand | Dilwe |
| Manufacturer | Dilwe |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Width | 0 cm (0 Inches) |
| Part Number | Dilwepag1n4m0xy-11 |
8. SnowBabe
SnowBabe 3 Pack 4 Pin PWM Fan Splitter Cable,Fan Adapter Connector, Sleeved Fan Hub 1 to 4 Converter 10 Inches, Fan Extension Power Cable
SnowBabe - Product function:the fan splitter cable provide four additional fan to increase airflow in your computer case, reduce the accumulation of heat within the chassis. Please make sure your motherboard fan header is available for the additional electrical load before purchasing, and please kindly contact us in time if there's any question, we'll reply you asap.
The 4-pin connector supports both 3-pin and 4-pin fans;Temperature control: the fan splitter cable provide additional fans to increase airflow in the computer case, reduce the temperature and ensure the operational speed of CPU.
Convenient to use: these 27 cm extension cables allow you more choice in where you want to position your PWM or fans inside your case, good for your daily use;This Y-type splitter cables is convenient for running four fans on one fan header.
3 pack pwm fan splitter cable in total;the fan splitter connects 4 Computer Case Fans to a Single Motherboard Fan Header, Compatible With 1 pcs 4 Pin and 3 pcs 3 Pin PWM Fan Connector.
9. DeepCool
Black, DEEPCOOL FH-10 Hub for 10 Fans, 3 or 4 Pin PWM Function for each port
DeepCool - Each port has its own PWM function and the fan speed can be adjusted simultaneously. Connect up to 10 fans simultaneously for PC dissipation. Modular design allows cable organization.
Powered by a sata connector to connect directly to the PC power supply to power up to 10 fans. Velcro fasteners and/or screws applicable to the interior of the chassis.
| Brand | DeepCool |
| Manufacturer | Deepcool |
| Height | 11.43 cm (4.5 Inches) |
| Length | 19.05 cm (7.5 Inches) |
| Weight | 5.68 |
| Width | 2.54 cm (1 Inches) |
| Part Number | FH-10 |
| Model | FH-10 |
10. EZDIY-FAB
EZDIY-FAB 3-Pack 120mm Dual Frame RGB PWM Fans for PC Case,Addressable RGB Case Fan with Fan Hubs,5V ARGB 3-pin Motherboard Sync,ASUS Aura Sync
EZDIY-FAB - Sync rgb lighting via motherboard:- must be work with an addressable RGB+5V, 3-pin capable motherboard or an Addressable RGB+5V, 3-pin controllerPlease check the ARGB motherboard of your motherboard before purchase! Fan speed control- dynamically control fan speed from 300 RPM to 1600 RPM to minimize noise or maximize airflow.
High performance- high airflow and large volume cooling by blade design, Super silent.
A best choice of two ways to control the rgb lighting system by Hub Controller or by ARGB SYNC Motherboard Software Press Mode buttom for 3 seconds to SYNC. 16. 8 million colors led Design-Colorful lightning design with unlimited color transformation.
VANDESAIL - Please check your devices specification before installation. Function: pwm fan splitter allows you connect 4 PWM devices on a single motherboard. Design: expand 4-bit 3-pin/4-pin fan interface to solve the lack of motherboard interface, as well as focus on the fan wire. Convenience:1 female 4-pin connector + 4 Male 4-pin Connectorsone for 12V CPU and three for case fans. Compatibility: fan hub 4 pin compatible with all 12V CPU and case fans with 4 pin or 3 pin connector. Note: don’t exceed 12v 2a total output.
YSSHUI - Please check your devices specification when to use the PWM fan hub; Total product length: approx. Compatible with all 12v cPU and case fans with 4 pin or 3 pin connector;. 14 inches. Power up to 5 pc fans from a Single 4-Pin PWM Fan Header. Please note: do not exceed 12v 2a total output. Connector: 1 female 4-pin connector & 4 Male 4-pin Connectors1 for 12V CPU and 4 for case fans;.
DEEP COOL - Double-sided adhesive Installation. Support PWM function. Support Cable management. 4-port fan hub. Compatible with 3-pin/4-pin fans.
YMWALK - Product function mainly to connect if CPU plug 4-Pin is not long enough or make three computer fans share one interface. 1 to 3 ways converterthe 4-pin 1 to 3 pwm fan adapter has three male interface, one 4-pin, show the same speed and can connect to 4-pin female connector.
ASHATA - Rgb 10-channel hub -- expands the rgb interface of the motherboard, which can expand one interface of the motherboard into 10 to meet the use requirements of multiple devices.
Dilwe - Realize 5v add‑rgb to 12v rgb lighting conversion, 5v add‑rgb equipment can be connected to the 12V RGB motherboard through the converter to achieve synchronization and compatibility of lighting.
SnowBabe - Product function:the fan splitter cable provide four additional fan to increase airflow in your computer case, reduce the accumulation of heat within the chassis. Please make sure your motherboard fan header is available for the additional electrical load before purchasing, and please kindly contact us in time if there's any question, we'll reply you asap.
DeepCool - Each port has its own PWM function and the fan speed can be adjusted simultaneously. Connect up to 10 fans simultaneously for PC dissipation. Modular design allows cable organization. Powered by a sata connector to connect directly to the PC power supply to power up to 10 fans. Velcro fasteners and/or screws applicable to the interior of the chassis.
EZDIY-FAB - Sync rgb lighting via motherboard:- must be work with an addressable RGB+5V, 3-pin capable motherboard or an Addressable RGB+5V, 3-pin controllerPlease check the ARGB motherboard of your motherboard before purchase! Fan speed control- dynamically control fan speed from 300 RPM to 1600 RPM to minimize noise or maximize airflow.
