As an Amazon Associate I earn from qualifying purchases.
EZDIY-FAB Vertical Graphics Card Holder Bracket with ARGB 5V 3Pin LED,GPU Mount,Video Card VGA Support Kit with 20cm Riser CableEZDIY-FAB
- Vertically display a gpu graphics card, Compatible with most brand's Graphic card up to RTX2080ti. Mounting vertical tray holder with connecting VGA riser cable. With movable bracket, More flexible in using PC case interior space. The riser cable connects the graphics card to the PCIe slot of the motherboard, a flexible ribbon cable with a length of 200 mm.
Vertical gpu bracket with rgb led effects, g, d, please note : not support 4pin rgb header +12v, G, Mystic, Synchronizable RGB lighting via motherboard AURA, B, R, fusion:support M/B 3 pin RGB Header 5V, 12 volts can destroy LED.
2. IBEST IMPETUS
Vertical Graphics Card Holder Bracket,PCI- E 3.0 16X Graphics Card,Video Card Support Kit with Riser Cable Full setIBEST IMPETUS
- Scope of applicationpci express pcie3. 0 16x cable card expandable port and expandable bracket for expandable motherboard when space is insufficient.
Product sizeflexible cable with 7. 7 inch extension Line of Display Card Converter Board. Compatibilitythis extension bracket and display card extension line are compatible with most brand graphics cards and GPU/motherboard.
Firmnessthe 4pcs magnet is placed at the bottom of the bracket, which is easy to absorb the box body, shock-proof and scratch-proof. Product characteristicshigh-quality solder joints and gold-plated contacts to achieve optimal conductivity and long-term use, as well as ultra-high-speed transmission performance.
3. Cable Mod
CableMod CM-VPB-HDK-R Vertical Graphics Card Holder with PCIe x16 Riser Cable 1 x DisplayPort 1 x HDMI, Black :: Components > Video Graphics CardsCable Mod
- Cable included: in addition, a very angled DisplayPort cable and an HDMI adapter are included for optimal installation requirements. Note: the total length of the graphics card increases by 3.
1 cm with the vertical support for graphic cards. Function: the vertical cable connects the graphic card to the PCIe slot of the motherboard. High compatibility: the bezel of the adapter slot connects to the chassis bezel and is compatible with all open slot PCI slot receptacles and at least seven free slots.
For data transmission, a flexible cable is used. Its x16 slot is electrically connected to 16 full data lines, which provides full bandwidth for graphic cards. Vertical graphic carrier assembly: with this support, which consists of a vertical PCIe cable and a special PCI slot frame, a graphic card can be installed vertically in all common tower cabinets.
|Height||10 cm (3.94 Inches)|
|Length||10 cm (3.94 Inches)|
|Weight||0.58 kg (1.28 Pounds)|
|Width||10 cm (3.94 Inches)|
EZDIY-FAB GPU Vertical Mount Bracket with DP Cable, Vertical Graphics Card Holder Bracket,Video Card VGA Support Kit with 200MM Riser CableEZDIY-FAB
- With movable bracket, More flexible in using PC case interior space. Easy installation, placing tray over all seven PCI slot spaces. The riser cable connects the graphics card to the PCIe slot of the motherboard, a flexible ribbon cable with a length of 200 mm.
Vertically display a gpu graphics card, Compatible with most brand's Graphic card up to RTX2080ti. Mounting vertical tray holder with connecting VGA riser cable.
EZDIY-FAB GPU Vertical Mount Bracket with DP Cable, Vertical Graphics Card Holder Bracket,Video Card VGA Support Kit with 150MM Riser CableEZDIY-FAB
- The riser cable connects the graphics card to the PCIe slot of the motherboard, a flexible ribbon cable with a length of 150 mm/5. 9in. Easy installation, placing tray over all seven PCI slot spaces. Don't fold the cable, which would cause poor connection and unstable signal transfer.
Mounting vertical tray holder with connecting VGA riser cable. With movable bracket, More flexible in using PC case interior space. Vertically display a gpu graphics card, compatible with most brand's Graphic card up to RTX2080ti.
|Part Number||UK2-GPU Bracke-V2+DP cable+15 CM|
|Model||UK2-GPU Bracke-V2+DP cable+15 CM|
EZDIY-FAB Multi-Angle Adjustment Vertical Graphics Card Holder Bracket Support,GPU Mount,Video Card VGA Support Kit with Riser Cable…EZDIY-FAB
- The base bracket is equipped with a strong magnet, which can make the bracket stable on the PSU shroud. The riser cable connects the graphics card to the PCIe slot of the motherboard, a flexible ribbon cable with a length of 200 mm. Only support PCIE3.
0 Before buying, please confirm whether there is enough space inside the chassis to install. For long or heavier graphics cards, please adjust to an appropriate angle to avoid falling. The adjustable gpu bracket allows end users to show off their GPUs by mounting it vertically, or at an angle between 0 and 45 degrees, on the PSU shroud.
|Height||3.6 cm (1.42 Inches)|
|Length||30.3 cm (11.93 Inches)|
|Width||7.9 cm (3.11 Inches)|
|Part Number||UK2-VGA stand|
GPU Graphics Card Support Bracket GPU Graphic Holder Brace Vertical Holster for PC Gaming GPU Brackets Braces Support Video Card for 1080ti gt 1030 2070 gt 1030 etc Graphics Cards with Magnetized BaseTREADALT-TEC
- These support arms hold the graphics cards pretty well and eliminate the graphics card sag completely. Also, it does not interfere with your adjacent brackets and PCIe slots, and you can use other PCIe expansion cards on your motherboard without any issues. With pretty strong magnet The bar and the stand are made of aluminum and is very stable.
Overall, a high-quality graphics card holder that works great and is very easy to install and use. It is only available in black color. This locking mechanism is relatively easy and quicker than compared to the tool-less screw ones in the upHere one. You can place it on the bottom of the case and also on the PSU shroud if you have a full-length shroud.
Universal vga holder if you are looking for a branded graphics card sag holder then this universal vga holder fits the bill perfectly. Graphics card holder comes with two bars, and you can either use one or two at the same time, depending on the height of the graphics card from the base.
The stand should be placed on the flat surface that is magnetic. The two supporters here are made of ps+ABS plastic and have a friction locking mechanism where you just have to push the clip inside to lock the support arms. This vertical graphics card holder can support two graphics cards in a multi-gpu setup sli or crossfire. This means if you have a smaller case then you are good with one bar only, but if the case is big then you can join the two bars together to extend its length so that it can reach the graphics card.
Everpert PCI-E3.0 16X Riser Card Cooler Stand Vertical Graphics Card Holder BracketEverpert
- Suitable for pci-e x1, x4, x8, x16 card. Support pci-e low and high configuration card bracket. Bracket size: 215 x 70mm/8. 46 x 2. 75". This bracket does not include PCI-E 16X cable. Support your card from droop and weight on the motherboard.
The video card gpu bracket component. The vertical card supports better protect your computer. Package included: 1 x plastic stand including rubber feet and Plastic Gaskets, 2 x M3 Thumb Nuts, 4 x M3 Screws and Nuts, 2 x Metal Hex Nuts.
Kafuty-1 Graphics Card Holder Computer LED Illuminated Graphics Card Support Holder GPU Support Frame Universal Vertical GPU BracketKafuty-1
- It can use the fan socket of the straight-plug motherboard, which is very convenient to install and use. It can maintain the durability of the product surface texture and keep the color unchanged for a long time.
The graphics card supports the protective shelf, and is equipped with 10 color lights, which can automatically circulate and change.
It is made of aluminum alloy, durable and durable, and can provide lasting support. The combination of magnesium-aluminum alloy side plates and intermediate acrylic plates on both sides can avoid the aging and vulnerability of single material and can be used as long-term components.
|Height||1 cm (0.39 Inches)|
|Length||1 cm (0.39 Inches)|
|Weight||0.13 kg (0.29 Pounds)|
|Width||1 cm (0.39 Inches)|
ADT-Link M.2 NGFF NVMe Key M Extender Cable to PCIE x16 Graphics Card Riser Adapter 16x PCI-e w/Vertical Bracket Stand Holder Base 25cm,Magnetic BaseADT-Link
- Pcb use high frequency low resistance of materials with high quality, gold finger plating enough gold, copper thickness thicken to 1oz, Good conductive performance, PCB using high TG board, can reduce oxidize higher impedance caused by the crash blue screen.
Suitable graphics card: gtx1080ti high-end graphics cards, fireprow7100, radeon rx580, prowx5100, VEGA64, quadrok1200 professional graphics card, support for all the PCIe CARDS after 2015 years.
Differential signal without hole design, there is no problem of signal attenuation interference in a parasitic capacitance and parasitic inductance, there will be no more CAF micro short circuit, cable is durability.
Wire advantages: using the german patent imported wire, using the Lotes connectors which imported from Taiwan, high frequency support PCIe 3. 0 x16 8g/bps stable transfer. Cable length: from 10 cm to 100 cm can be customized, our wire has a low impedance, the cable below 60cm can be stable at PCIe3. 0 full speed reading and writing.